BAUR Software 4

Software package for cable fault location, cable testing and cable diagnostics

Efficient. Cost-saving. Forward-looking.

The BAUR Software 4 is a software package for cable fault location, cable testing, and cable diagnostics. It enables efficient monitoring of the condition of cable networks in combination with BAUR hardware.

The BAUR Software 4 scope of performance far exceeds standard features; the operator is also assisted by the intuitive operational concept and helpful support functions.

Download data sheet Download data sheet

BAUR Software 4 – the advantages

Extremely user-friendly

Maximum flexibility with maximum support

Innovative operational concept that provides optimum support for the operator.
Minimal training required
Intuitive user interface adapted to the work flow

Central data management

providing a better basis for decision-making

Import and export interfaces for simple data exchange
Comparable measurement results due to uniform sequences
Maximum information thanks to extremely simple data transfer

Time savings on site

due to automated sequences and report generation

Systematic measurement procedures on site
Automated evaluation and conclusive report generation thanks to pre-defined evaluation criteria

Better decisions

based on comprehensive condition evaluation of the cable network

Conclusive measurement methods and clear measurement results
Accumulation of experience thanks to comparable measurement results and historical data comparison

Connect and go – the new operational concept

An ergonomic and intuitive software interface speeds up work processes and makes it easier for operators to do their jobs. Standardised sequences are simple to call up and start, while the software guides operators through more complex measuring tasks. Measurement results are clearly presented and can be interpreted at a glance. This means that new staff can easily find their way around the interface and quickly obtain reliable results. However, the software also offers an expert mode in which experienced measurement engineers have direct control over processes and parameters. Help is also at hand for users whilst locating faults, with cable data and measured values linked to maps so that operators can quickly see where the problem lies.

The BAUR Software 4 display enables clear visualisation of all important settings, fault location parameters, and cable data. The bottom part of the screen shows the measurement results and allows important events to be logged straight away.

Lots of devices – one software tool

Determine the cable condition with just one software tool

The BAUR Software 4 controls BAUR devices for cable fault location as well as cable testing and diagnostics. The software not only includes all the necessary standard measurement methods, but also simplifies the day-to-day work routines of measurement engineers with innovative features such as parallel TD and PD measurement as well as the step-by-step Smart Cable Fault Location Guide.

Software for cable fault location

More information More information

Software for cable testing and diagnostics

More information More information

Easy and comprehensive evaluation of cable networks

The new BAUR Software 4 allows you to quickly detect and evaluate the cable condition in accordance with your own diagnostics philosophy. The intuitive operational concept supports asset managers and measurement engineers working on site, firstly with the extremely efficient measurement process and secondly through precise condition monitoring of cable networks. In short: The BAUR Software 4 elevates application and evaluation to a new level – thereby enabling further optimisation of the condition-based maintenance of cable networks.

Bitte stimmen Sie den Cookies zu, um diesen Inhalt anzusehen.

View/agree cookie information View/agree cookie information

Our software – your benefits:

Better decisions based on comprehensive condition evaluation of the cable network
Saves time on site thanks to automated sequences and report generation
Easy operation thanks to the intuitive operational concept

BAUR Software 4 is the ideal partner for your individual cable diagnostics process

Your own diagnostics philosophy as the basis

Operators can either use standardised diagnostics sequences or create their own company-specific diagnostics sequences. To do this, in-house specifications for various cables or various phases in the network life cycle, such as commissioning or maintenance, are simply created within the diagnostics sequences. The criteria, ranging from current standards and guidelines through to company-specific specifications, are thus stored at the start of every measurement and the engineer starts the measurement procedure with just a few clicks.

Comparable results – better basis for decision-making

The sequences can be exported directly to all BAUR measurement systems used and can be adapted at any time as required. These standardised measurement cycles provide asset managers with reproducible and comparable measurement results that show not only the condition but also the ageing of a cable route over time – the ideal basis for making informed decisions concerning network planning and investment in maintenance.

Evaluation made easy

All measurements and tests (including all condition data for every cable route) are stored in the central cable database. The results are represented graphically during the process, even while evaluating the measurement. At the end of measurement, the overall condition of the cable route is displayed along with the results of the individual measurements.

All information at a glance

The BAUR Software 4 automatically generates reports on the measurements that have been performed. The reports contain all the information about the tested cables and can be exported as a PDF file. The diagnostics results and condition evaluation can also be easily presented in graph and table format.

The measurement methods

The BAUR Software 4 is used together with BAUR test and diagnostics systems for cable testing (VLF truesinus®, VLF square wave, and DC voltage), cable sheath testing, and diagnostics with dissipation factor measurement or partial discharge measurement.

Cable testing	Cable testing (VLF truesinus, VLF square wave, DC voltage)
TD measurement	Dissipation factor measurement
PD measurement	Partial discharge testing
TD & PD measurement	Parallel dissipation factor and partial discharge measurement

BAUR Software 4 for intuitive cable fault location

The BAUR Software 4 covers all the solutions for cable fault location, cable testing, and cable diagnostics, ensuring efficient and precise condition monitoring for cable networks when used in conjunction with BAUR hardware. It includes well-established measurement methods for cable fault location as well as innovative approaches such as Conditioning-SIM/MIM, enabling even faster and more effective localisation of wet cable faults that are difficult to locate.

Non-destructive and safe pin-pointing

through remote control of titron® via smartphone or tablet

By switching the high voltage on and off in a targeted manner, the stress on the cable and the system is reduced to the necessary minimum and operator safety is significantly increased.

Platzhalter: SmartCFLGuide

Stop searching and start finding with the Smart Cable Fault Location Guide

The Smart Cable Fault Location Guide makes for faster, easier cable fault pre-location and pin-pointing. A special algorithm continuously analyses the current measurement results, which it then uses to generate optimum recommendations for how the operator should proceed in order to reliably locate the cable fault. Automatic fault analysis and clear graphic display of the measurement results with helpful functions for evaluation provide a better overview. This means that new staff can easily find their way around the interface and quickly obtain reliable results. However, the software also offers an expert mode in which experienced measurement engineers have direct control over processes and parameters.

The full flexibility of the software provides maximum support during the measurement processes whilst giving users the option to use their own expertise and select user-specific procedures at any time.

Documents

Product enquiry for BAUR Software 4

Data sheet

Product enquiry

Product overview

Recommend / share product "BAUR Software 4":

Other interesting products:

viola TD

Testing and diagnostics unit

titron

Intelligent test van
for cable fault location
and diagnostics

frida TD

VLF tester and diagnostics device (TD)
for medium-voltage cables
up to 36 kVpeak

transcable 4000/S 32-3

Cable test van:
3-phase, semi-automatic,
32 kV

transcable 4000/S 70-3

Cable test van:
3-phase, semi-automatic,
70 kV

transcable 4000/A 80-3

Cable test van:
3-phase, automatic,
80 kV

transcable 4000/S 110-1

Cable test van:
1-phase, semi-automatic,
110 kV

PD-TaD 62

Portable PD diagnostics system
up to 62 kVpeak

PD-TaD 80

Portable PD diagnostics system
up to 80 kVpeak

Your direct link to BAUR

Contact BAUR directly Contact BAUR directly

Find your local representative Find your local representative

Necessary / Required
These cookies are essential for the operation of the website and to enable security functions. They also allow you to conveniently remain logged into your profile for when you visit our website again.

Marketing
We collect anonymised data for statistics and analysis. This helps us to keep our website and its contents optimised at all times.

Personalisation
These cookies make it easier for you to use the website, for example by remembering settings for future use.

BAUR Software 4 Software package for cable fault location, cable testing and cable diagnostics

BAUR Software 4

Software package for cable fault location, cable testing and cable diagnostics